Universal length suppressor (gel blaster) tips - 14mm CCW mount
Description
Body end and barrel ends to use a (customisable) length of PVC to create a barrel and hop-up supporting suppressor for a gel blaster. The body end is designed to screw on the a 14mm CCW-threaded outer barrel, with at least ~4mm of 9.5mm inner barrel exposed. The barrel tip is designed to fit over (and support) a ~22mm hop-up (i.e. [Matty's Hopup - Gellball Blaster Adjustable HopUp](https://www.thingiverse.com/thing:3236970)). The design suits PVC pipe of ~34mm OD and ~29.5mm ID (what I happened to have lying around) of any length (i.e. to suit your barrel). I used ~85mm for a stock JinMing ACR J10. To fit, screw on the body end, then mount your hop-up, fit the PVC sleeve (I used a couple of tiny dabs of hot-melt glue to secure), then fit the barrel/tip end over the hop-up / into the PVC. Designed from scratch, but inspired by [Superpoo](https://www.thingiverse.com/Superpoo/about)'s [Gel Blaster Customisable Suppressor / Silencer](https://www.thingiverse.com/thing:3911110/files).
Statistics
Likes
4
Downloads
0