Nano Tool - quick swap hotend for 3D printers
Description
This is the Nano Tool I use in my CorEssentials 3D printer. You can find the most current files on the GITHUB-Page: https://github.com/MacNite/CorEssentials There are 3 different kinds of tools available: - Nano Tool Bowden (Coldend: 1x MF25101V1, Part Cooling: 2x UnitedPro 3510) - Nano Tool Zesty Nimble (Coldend: 1x MF25101V1, Part Cooling: 2x UnitedPro 3510) - Chimera Aqua Tool (Coldend: Alphacool Eisbaer Solo, Part Cooling: generic 4010 Blower) Most of the tools are available with markings for the nozzle size (i.e. 040 for a 0.4mm Nozzle). All these tools are desinged to work in the passivly heated chamber of the CorEssentials. I have tested them successfully for ambient temperatures of up to 55°C. I would not go much higher with chamber temperature on my printer because I printed the parts I use for the printer from ABS.
Statistics
Likes
10
Downloads
0