1/4" Square to 1/2" Socket adapter
Description
I Created This For A Project To Eliminate Needing To Purchase And Use Multiple Socket Adapters. My Use For This Was To Attach A Low Scale Inch Pound Torque Wrench With 1/4" Square Drive To A Large Socket Needed For A Yoke Nut. This Will Allow Me To Set Bearing Preload (Less Than 10 In/Lbs) With A More Convienent Tool Setup Than A Stack Of Adapters. I Stress Tested One, It Stripped The 1/4" Square Hole At 50 In/Lbs. Definately Not For Use With Any Solid Torque. For Setting Resistance Of A Moving Part, It Should Be Adequate.
Statistics
Likes
14
Downloads
0