Woodturning: curved skew chisel grinding jig
Description
CSGJ - curved skew grinding jig based on Wolverine grinding platform. It consists of three parts: 1. platform 2. triangular slider (2 version) 3. limiter The holes are configured for three skew sizes: 3/4 inch (19 mm), 1 inch (25.4 mm), 1 1/4 inch (31.75mm) See the picture for settings For repeatability of sharpening, the platform must always be placed at the same distance from the wheel - 34 mm to the center of the first hole in the platform. You can use a special version (SE named) of the angle template to configure the platform: https://www.thingiverse.com/thing:3948746 Slicer setting: Platform 0.3 mm layer support ON !!! Platform must be printing with 100% infill for hardness !!! Slider & limiter 0.12-0.16 layer 15% infill After printing, calibrate the hole with a 5.5 mm drill bit The slider has two versions: - with a printed pivot - with a threaded hole for a DIN912 M3x6mm screw (stainless steel) See also regular skew guide: https://www.thingiverse.com/thing:4005392 oval skew guide: https://www.thingiverse.com/thing:4125029
Statistics
Likes
29
Downloads
0