Ender 3 Filament Holder 60mm with stock nut
Description
This is a 60mm wide spool holder for Ender 3, using the original factory nut. This is a remix of remixes of remixes... It is somehow the "ultimate remix" in my point of view, as the opening will fit spool holes from 40mm and maximum width of 60mm (which are the most common standards from my experience). Careful, it really works only up to 60mm width, I had experience of a spool 75mm falling from the printer! You could damage your printer or more. If you need 80mm here is what you need : holder: https://www.thingiverse.com/download:7085660 roller: https://cdn.thingiverse.com/assets/0a/82/b7/a4/03/FilRoller_80mm_V1.STL You'll need 2 608ZZ bearings. As I didn't have any I printed some, they work fine, just had to wear them a bit and lubricate them. I didn't do much on this work, just reduced the part of jaft64, and used the part of Firedrops. Thanks to them and original makers HugoHuge and mjoaris. Please watch the 2 last images for best printing orientation : best stiffness and least support
Statistics
Likes
325
Downloads
0