SCX24 FPV Camera Mount
Description
I wanted to mount an FPV system to my new Axial SCX24 and have several of the "AKK A5" FPV camera/VTX combo's lying around for tinywhoop repair's so I slapped one onto the AUX power leads (bottom two pin's, with the bottom row being negative, and the middle row being +5v positive) so the installation was super simple with this camera mount. Just using some double sided adhesive tape, stick it centered on your vehicle to the axial AE-6 ESC combo unit's casing so the pillars are just past the overhang (last pic in the series above for detail, or just test before sticking yourself!) IT WORKS SO WELL! Camera/VTX is the AKK A5: https://smile.amazon.com/dp/B073WV3HLS/ref=cm_sw_em_r_mt_dp_U_PRTiEb6Z3BXP4 Vid of it in action: https://youtu.be/ek8IIm3YoQg Seriously, if you have some FPV goggles already, do yourself a favor and try FPV Crawling! Printed mine with 3 layers so the pillars that snap fit (very snugly) the camera lens are 100% infilled at their narrowest points with advanced PLA in industrial grey.
Statistics
Likes
41
Downloads
0