Ikea Lack Spool Rack / Holder
Description
WIP uses 1x2 inch common boards Takes about 1.2 KG of PLA currently, the bottom riser lifts the lack up to accomidate the 2 rows of filament holders, as the stock ikea lack will only fit 1 row. Might look into replacing this with some type of wood and a sleeve like the top portion and riser are, instead of using PLA to fill the gap on the bottom riser. bottom riser adds about 140mm of height to the bottom of the legs, so be warned this will not be the same height as another Lack table sitting next to it, but instead sit 140mm higher. This current version requires 19 feet of commonboard 1x2's and some nails.
Statistics
Likes
29
Downloads
0