Crossbow EK Cobra Adder downgrade to R9
Description
<h3>Update 2021/01/28:</h3> The spring has now 1.5 mm more pressure on the bolt. Added a second version, where the picatinny rail is tilted by 1° to the front. This is usefull if you want to shoot higher distances and the adjustment range of your scope does not go down far enough. <br> Added a two piece version. Sping will be printed as seperate part laying on the side. No support needed. Main part printed picatinny rail down. Two different materials possible. e.g. stiff pla for the main part, slightly flexible material for the spring. (PETG or Nylon) <br> <h3>Update 2021/01/25:</h3> Clearance reduced so that the part is centered. Added a hole from the top for an M4 screw to better fix the part. First tighten the original Adder screw, then the rear screw, then the top one. <br> If you want to shoot longer arrows with your Adder without messing around with the metal hook of the magazine, just replace the magazine with this thing. <br> For stability of the body and flexibility of the arrow hoder I used nylon filament. PETG might work as well. <br> For fixation the original screw of the Adder magazin is used. In addition there is a M5 screw that just pushes at the back of the lock. <h3>Attention: Due to the reconstruction there is no more dry shot protection. </h3> If you like this thing you can tip me a beer https://paypal.me/Logan0981?locale.x=de_DE
Statistics
Likes
23
Downloads
0