Wireless weather station v2 - Radiation shield for temperature and humididy sensor (SHT31)
Description
Weather Station V2 ==================== This is the new version of my wireless weather station. It will be composed as different parts : - The radiation shield for the SHT31 and BME280 sensor, that measure temperature and humidity (this part). - The particule matter sensor (https://www.thingiverse.com/thing:4147660). - The main unit based on ESP32 board with wifi and its solar power supply (coming soon). - The rain gauge (https://www.thingiverse.com/thing:4725413) I will add after a wind speed meter. # Radiation Shield You need one bottom, one top and seven middles with the uploaded stl. If you need more, the parameter in the finish function specifies how many middle parts are used and resizes the top part. To finish the assemblie of the radiation shield, you need 4x little screw 2.9x16. The base part is screwed to the pipe (PVC DN40x3.0) with 3x screw 2.9x16. ----------------------------------------------------------------- The bottom part uses the Aubend's Poor man's openscad screw library (https://www.thingiverse.com/thing:8796) for the thread.
Statistics
Likes
36
Downloads
0