FuzNuz Foal Hoof Extenders
Description
Update 4/28/20: Added lateral extenders as well as the heel extender This design is for veterinary applications only and should only be used as directed by a veterinarian. This is a modification of the full size glue on hoof boot with a slightly rounder attachment point and a long plate as a heel extender for treatment of foals with flexor tendon laxity. Glue on with some kind of permanent but easily removable glue rated for equine use. Here is an example but there are several options out there: https://www.hoof-it.com/collections/glue-on-horseshoes/products/hoof-glue In emergencies any two part epoxy should be sufficient, however removal of the shoe afterwards could prove problematic and require extensive filing away of the excess glue and plastic. Use only enough glue to secure the shoe, but not so much as to risk damage to the hoof wall if the foal steps on the extender. In extreme emergencies, duct tape may be used to secure the extension, but this somewhat voids the need for a 3D print as a piece of wood would be faster to construct. Part is designed to fit a hoof that is approximately 2.5-2.75" in width, with a front slope of 50 degrees. For a specifically fitted shoe that you need on emergency notice please leave your requests in the comments. Every reasonable attempt will be made by FuzNuz to provide a custom shoe design within 24 hours. For non-emergency requests please e-mail FuzNuzHorseEquipment@gmail.com or send a message through the Thingiverse messenger. Special thanks to the imagery and information provided in: Equine Emergencies Treatment and Procedures: 4th Edition, by James A. Orsini and Thomas J. Divers, Elsevier Saunders, 2014, pp. 307. For inspiring this design.
Statistics
Likes
7
Downloads
0