Headphones Stand
Description
This stand was designed so that it could be printed on a small printer with a 120mm x 120mm print area. The top and base are connected by two 3/8" wooden dowels such as the ones from Amazon below. I cut them down to a smaller size. If you want to add weight to the base, pause the print just before the end and filled it with sand, salt, or any other material. The stand will also work just fine without weight as well. Enjoy! https://www.amazon.com/gp/product/B004KQS2UK/ref=ppx_yo_dt_b_asin_title_o00_s00?ie=UTF8&psc=1
Statistics
Likes
7
Downloads
0