MP Select Mini V2 E3D Dual 30mm Fan Shroud & Mount
Description
Replacement fan shroud and mount for Monoprice Select Mini V2 with E3D Lite6 hot end. This shroud uses 2 30mm fans for cooling the hot end and parts cooling. It was designed to go with this mount https://www.thingiverse.com/thing:2698327 or the modified version available in this post. Since it was designed for an E3D hot end, it might not work with the stock hot end. Requires 4 3.0mm x 16mm screws (usually come with the hot end) and the 4 stock fan screws. Only requires one of the springs that hold the original shroud since It clips on the right side of the hot end housing. It should be printed with ABS but PLA seems to work fine as long as you keep the part-cooling on. Supports are needed to print the fan shroud. They are hard to remove but pliers and a small flat-head screwdriver will help to remove them.
Statistics
Likes
8
Downloads
0