Backup camera mount
Description
Buy a license plate-mounted backup camera and transplant the camera into this mount that allows you to put it wherever you want. I mounted mine directly above my van's rear window. You will need: - (1) license plate-mounted backup camera, I really like this one: https://www.amazon.com/gp/product/B074KZSVD6/ref=as_li_ss_tl?ie=UTF8&psc=1&linkCode=sl1&tag=reeall-20&linkId=6971060b14741086ca59f957cf9a14b2&language=en_US - (2) Sheet metal screw, American #10 size, flanged hex head, at least 5/8" long - (4) M3 socket-head or button-head cap screw, 10 mm length - (4) M3 plain hex nut (not nyloc) - Optional: RTV silicone to seal the mount against the car and keep moisture out Also needed: - A drill and an assortment of drill bits - The ability to be brave enough to drill holes in your car - Wire cutters, wire strippers, soldering equipment - you'll have to cut the camera's cable, feed it through a hole you drill in your car, and then re-solder the wires back together on the inside I included a rough model of the backup camera I used so that you can check yours and confirm that it's the same dimensions.
Statistics
Likes
4
Downloads
0