Flexible LED lamp (1/4" coolant pipe & GU10 socket)
Description
This is the LED light holder for coolant pipe, i remixed this thing : https://www.thingiverse.com/thing:1331285 to use this with GU10 socket, which is more common and it's powered by 230 VAC so you don't need 12 VDC power suply. I added "ventilation holes" and sockets for M4 nuts - you need pause print an insert them. Now you can change bulb without destroying the print with wood screws. Depending on you printer's precison, you may have difficulties with connecting the ball joint. Try to make little phase on the edge of the inner sphere, detach one segment of pipe, and push it with the small hammer :P. Now connect it to the rest of pipe. I recomend to use variable layer height in Prusa Slicer to improve only quality of ball joint. List of parts: - coolant_lamp_GU10_lower - coolant_lamp_GU10_upper - 1/4" coolant pipe - LED GU10 spotlight - ceramic GU10 socket - 3x M4 nut - 3x M4 scew - 2x M3 nut - 2x M3 screw - 1.5mm^2 wire
Statistics
Likes
25
Downloads
0