Tee pipe connector fully customizable
Description
This project has been completely reviewed and enhanced in: Pipe connector (1 to 6 pipes) highly customizable https://www.thingiverse.com/thing:4192048 ================================================================== Fully customizable tee pipe connector. Using the customizer, you can select: - external diameters of the 3 pipes, individually - internal diameters of the same, individually - individual lengths of the 3 pipes, anf of the insert section The diameter of the inside junction can be defined. The pipe extremities are rounded. A test parameter allows to look inside the connectot. Use support as needed when printing. Enjoy ! ===================================================== With Tee4, THE ANGLES ARE FREE ! <<<<<<<<<<<<<<< but stay on Tee3 for a pure flat Tee. ======================================================== T3cross is a derivative of Tee3 with a "cross" parameter. It mirrors the transverse pipe to get a 4-way cross. This a flat (no free angle) version. ====================================================== T3full: gives access to full parameters of a flat version (but no angle liberty): USE ONLY IF YOU NEED IT New parameters: test: more cuts to look inside 0, 1, 2, 3 FT : enable separate borings DT (for one or 2 transverse, DL (left part),DR (left part) SP: cut an internal sphere at the junction point ======================================================== Tee20.stl is already configured for a tee with 20mm internal diameter and a high resolution.
Statistics
Likes
13
Downloads
0