Squircle Calibration Cube
Description
SUMMARY 20x20x20mm calibration cube/circle/thing that will highlight issues such as: - X/Y/Z/E step miscalibration - all axis should give an accurate reading of 20mm when measured with calipers. (Use rounded section for X/Y measurement. Z axis is also filleted to allow accurate measurement without interference of other issues such as linear advance miscalibration etc) - Inadequate cooling on lettering overhangs - small overhang sections should be sharp with minimal 'sag'. - Linear Advance miscalibration on the squared corners - corners should be sharp without any 'bumps' - Ghosting/ringing - sharp lettering and dedicated dimple sections should show little to no ghosting) PRINT SETTINGS Print in whatever material and print settings that you're trying to calibrate with.
Statistics
Likes
23
Downloads
0