Ender 5 - Belt Tensioner - Y-axis
Description
<h2>Ender 5 - Belt Tensioner - Y-axis</h2> Use Stock Idler Pulley. See also my Design of the <strong>X-axis Belt Tensioner for Ender 5</strong> https://www.thingiverse.com/thing:4127601 <h3>Ender 5 Y-Axis Belt Tensioner Printed Parts:</h3> For left and right side print every files twice. <ul> <li>ender5_belt_tensioner_y_axis_part_1_v1.stl</li> <li>ender5_belt_tensioner_y_axis_part_2_v1.slt</li> <li>ender5_belt_tensioner_y_axis_part_3_v1.stl</li> <li>ender5_belt_tensioner_y_axis_part_4_v1.stl</li> <li>ender5_belt_tensioner_y_axis_part_5_v1.stl</li> </ul> <img src="https://cdn.thingiverse.com/assets/3a/8b/b5/f9/e7/featured_preview_ender5_belt_tensioner_y_axis_assembled_v1.png" alt="Ender 5 - Belt Tensioner - Y-axis" title="Ender 5 - Belt Tensioner - Y-axis" /> <h3>Other Parts:</h3> <ul> <li>1x Idler Pulley (Stock)</li> <li>1x Screw M5x30 (Stock)</li> <li>3x Screw M5x8 with <a href="http://s.click.aliexpress.com/e/dVQNF8EG">T-nut</a> </li> <li>1x Screw M5x14 with <a href="http://s.click.aliexpress.com/e/dVQNF8EG">T-nut</a> or 1x Screw M4x14 with <a href="http://s.click.aliexpress.com/e/dVQNF8EG">T-nut</a></li> <li>1x Screw M3x20 with Nut</li> <li>2x Screw M3x35 with Nut</li> </ul> This is a very accurate device. The design clearance between the elements is 0-0.1mm. Print on a correctly calibrated printer and clean printed parts before assembly. Use fine grid sandpaper if needed. The Pin "ender5_belt_tensioner_y_axis_part_2_v.stl" should go into inside bearing bore without gap (I increased filament Flow Rate about 4% during printing this part to reach real diameter 8.05mm). <img src="https://cdn.thingiverse.com/assets/e5/0a/f0/7c/34/featured_preview_ender5_belt_tensioner_y_axis_v1.jpg" alt="Ender 5 - Belt Tensioner - Y-axis" title="Ender 5 - Belt Tensioner - Y-axis" />
Statistics
Likes
272
Downloads
0