Edam Exer or Serpent (960) 6v Battery holder

Edam Exer or Serpent (960) 6v Battery holder

Description

This is a replacement cap for the controller box with a 6v battery holder attached. Also moved the antenna hole 3mm away from the brake pin, this was always a bit too close to each other. Should be fitting a Serpent 960 also since it is a clone type of car. STL 1 you'll need "support touching buildplate" and STL 2 is ready without any help. Printing takes about 3 hours in total.

Statistics

Likes

0

Downloads

0

Category

R/C Vehicles