SKR Pro V1.1 Mount Plate (Customizable)
Description
This is not a spacer for an SKR Pro V1.1 Board. This is a mount plate which supports the SKR board when mounted, so you can work on it without bending the board and damaging it. The board sits on the pillar side and the soldered side is located in between. The 2mm gab between board and plastic gets filled with all the pins sticking out at the end, supporting the rest of the board. I found several cases and mounts, but I needed one with spacers on the board side, so the soldering pads don´t push on and into the mounting surface, which in my case is a wooden plate. If you need or want spacers just print some 6mm tubes with a 4mm hole for the screw.
Statistics
Likes
12
Downloads
0