replacement case for Hörmann HSE 4 BiSecur transmitter
Description
This is a replacement case for Hörmann HSE 4 BiSecur sender. There are various options: with or without protective slider, using the original metal pin or with a simple hole, with or without icons. You need to pick an appropriate set of bottom, top, and, potentially, the slider. To connect both parts I used screws from my collection from broken electronics, depending on what screws you have available you may need to adjust the hole size in the OpenSCAD file. Also, if you want custom icons you also need to edit the OpenSCAD file. For the final assembly I recommend to place a thin piece of foam on top of the PCB (on the battery) so that it sits tight and does not wiggle. Alternative designs for HS4: * https://www.thingiverse.com/thing:3369311 * https://www.thingiverse.com/thing:4820040 Alternative designs for HS2: * https://www.thingiverse.com/thing:2727835 * https://www.thingiverse.com/thing:4297975 * https://www.thingiverse.com/thing:1495307 * https://www.thingiverse.com/thing:2846046
Statistics
Likes
6
Downloads
0