PLAzzy Lamp (Dog), LED 12V 2.5W
Description
Some time ago I found an awesome wooden dog LED lamp by "Well Done Tips" on intructables.com. I built this lamp for my grandson and I thought about designing this lamp in a smaller version for 3D printing. The dimensions of the original wooden version (I gave him the name: Woody) are about 530x450mm, those of the 3D version about 320x290mm. I have reduced the original by about 40%. Based on the filament material I use here, I call him PLAzzy (PolyLactic Acid). I have tried to capture the working steps and the assembly in photosl For this project you will need: 2x... Ø 4x55mm from a threaded rod (or screw Ø m4 x 60 and saw of the screw head) 2x... Ø m4x20mm (for the ears) 2x... Ø m3x16mm + plus 2 matching washers (to connect head, neck and light base) 6x... wing nuts Ø 4 mm 16x...washers Ø 15x4,5mm 1x... 64x64x3mm white acrylic glass, 70% translucency (or transparent acrylic glass or twin wall-sheet) 4x... self-tapping screws 2,2x 2,9 mm AC/DC Socket 5,5/2,1 mm 4G bulb socket 4G bulb 2,5W/250Lm AC 125 V 6A ON-ON 3 Pins 2 Position Mini Toggle Switch 12 V AC/DC power adapter Solder Soldering Iron IMPORTANT: I do not recommend installing higher wattage bulbs in this lamp, as the heat development could be too great. The files must be printed in the following number of copies: 1x PLAzzy_LED-Dog-Lamp_head.stl 1x PLAzzy_LED-Dog-Lamp_back.stl 2x PLAzzy_LED-Dog-Lamp_ear.stl 2x PLAzzy_LED-Dog-Lamp_body.stl 2x PLAzzy_LED-Dog-Lamp_leg_long.stl 2x PLAzzy_LED-Dog-Lamp_leg_short.stl 1x PLAzzy_LED-Dog-Lamp_neck.stl 1x PLAzzy_LED-Dog-Lamp_tail.stl 1x PLAzzy_LED-Dog-Lamp_lightsocket.stl Video: https://youtu.be/lm42bri2PHw
Statistics
Likes
38
Downloads
0