Artillery Sidewinder-X1 - AddOn Cap - Camera Adapter
Description
An expandable cap for the printer frame. It covers sharp and unsightly edges and can be extended with a camera arm. With 0.2 mm distance between component and frame it fits exactly and is very tight. You only need two bolts or nails (as shown in the picture) to fix the extension stable. Please look at the pictures below for more details. (because a picture says more than 1000 words) Edit: - I have added transverse stiffeners inside and outside the joints, as well as small improvements such as more break-resistant dowels. Second-Edit: - Now with a full-featured clamp to mount a GoPro or smartphone at any angle. Just plug the clamp together as shown in the pictures or in the "complete.stl" and if necessary pull a rubber band through the openings or hooks provided. I made the option to attach the rubber band as freely as I could. As always in my designs, I did my best to avoid the need for supports in printing and kept the print itself simple. Do the environment the favor and produce less waste.
Statistics
Likes
46
Downloads
0