TARDIS "1963" Candy and Storage Boxes
Description
Been working on skins for my Raspberry PI boxes. This is my first working skin. While working on skins, I generated a number other options, including figure and boxes that that can be scaled from 0 to N mm/inch. Hence with you enter 25mm/inch your printer should be able to print a LIFE sized prop. Normal sizes I use is 1.00, 1.85, and 3.93 for bases of 50mm, 92mm and 200mm sq. Note in the scad. // all numbers from plan for the TARIDS: // 1963 Peter Branchacki Prop // they are inches on the plan... with scaling // adjustment will be all in mm for this build // some numbers are guesses based on visual // "measurements" from drawings. As newer SCAD are available I will circle back update this one. All will be attached to main project for Raspberry Pi boxes. I have also upgraded to OpenSCAD 2019-05 https://www.openscad.org/downloads.html I use a 3D coldbed printer with 0.4mm nozzle. All boxes have been printed without added supports, just ones I designed in. I do supply versions without my supports if you prefer your tools versions instead. I print at 0.2mm per layer at 30% hex fill.
Statistics
Likes
13
Downloads
0