CR-10 V2 Standalone
Description
Standalone Gehäuse für den CR-10 V2. Netzteil und Board passt alles Plug & Play, nur die Kabel vom Zuleitungsstecker zum Netzteil müssen verlängert werden. Es ist für einen Raspberry Pi, 2x Relais und einen Stepdown geplant. Von mir verwendeten Teile: 2x 120x120 Lüfter die Luft in das Gehäuse bringen. https://www.amazon.de/gp/product/B002KTVFTE/ref=ppx_yo_dt_b_asin_title_o07_s01?ie=UTF8&th=1 2x Relai für Licht und Ein/Ausschalten des Druckers oder Sontiges Vorhaben https://www.amazon.de/gp/product/B07CNR7K9B/ref=ppx_yo_dt_b_asin_title_o06_s00?ie=UTF8&psc=1 1x Stepdown für die Lüfter 24V -> 12V https://www.amazon.de/gp/product/B077VW4BTY/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1 M3; M4; M5 Schrauben und T-NUT https://www.amazon.de/gp/product/B07CJD21R3/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1 1x Raspberry Pi 4 https://www.amazon.de/Raspberry-Pi-ARM-Cortex-A72-Bluetooth-Micro-HDMI/dp/B07TC2BK1X/ref=sr_1_3?__mk_de_DE=%C3%85M%C3%85%C5%BD%C3%95%C3%91&keywords=pi+4&qid=1580575506&s=computers&sr=1-3 1x Netzteil Pi https://www.amazon.de/Raspberry-Pi-offizielles-Netzteil-Model/dp/B07TZ89BT7/ref=pd_aw_sbs_147_7?_encoding=UTF8&pd_rd_i=B07TZ89BT7&pd_rd_r=ab11f60a-ef48-4fc2-a81a-703ac307b63e&pd_rd_w=TaFUV&pd_rd_wg=5kwpl&pf_rd_p=18fb0ab8-abcc-472e-885d-49de22bb68a7&pf_rd_r=QK2ZZZNM5293BA0P9WP3&psc=1&refRID=QK2ZZZNM5293BA0P9WP3 2x Kabel für Display https://www.amazon.de/Verl%C3%A4ngerungskabel-Verbinder-Extension-Connector-A1917/dp/B07D3DYHPR/ref=pd_day0_hl_107_7?_encoding=UTF8&pd_rd_i=B07D3DYHPR&pd_rd_r=b51e5f36-90d0-430d-990e-6da5e5a5bf30&pd_rd_w=T3cyO&pd_rd_wg=oAYp2&pf_rd_p=c35e9330-5a0a-4f10-958d-98313df38778&pf_rd_r=JHK5XPWYND4XF13TT71C&psc=1&refRID=JHK5XPWYND4XF13TT71C
Statistics
Likes
14
Downloads
0