BLTouch test checkers field
Description
[ If you like my model(s), please visit this page https://www.facebook.com/neorisKir/ and set "Like" to it! you will help me more than even giving a tip. Thanks in advance! ] It's a good measure to check if your BLTouch is working evenly over the whole bed. Designed for Tevo Flash. Will be good for Ender-3 as well! The squares are connected but just slightly. Print on a clean surface, use a hair spray or a 3d-laque to make a good adhesion (if you have a glass or a mirror). Printing on a painter's tape is possible but not the ideal option. Use an appropriate glue then. This test uses a relatively small amount of a filament. It will be printing for about 30-40 minutes but shows any issues clearly.
Statistics
Likes
11
Downloads
0