DUET3D INDIRECT LASER FILAMENT HOLDER
Description
UPDATE 26/09/2020 uploaded with "V4 CORE LEFT fix.stl" if it is still corrupt in this thing go to https://www.thingiverse.com/thing:4607340 UPDATE 07/05/2020 I created the variant to insert an enstop switch to be connected directly to the duet2 (mainboard), shortly I will redesign the "top" cover in order to connect the switch to the laser sensor's input. Now the design is modular, the Core should remain the same also for future implementations. ARMOR pieces are purely aesthetic .... Tensioner1, tensioner2, top and top_base have not changed YOU NEED TO ADJUST THE LEVER OF THE ENDSTOP, I HAVE FOLDED MY AND SLIGHTLY BEVED AN ANGLE WITH THE CUTTER TO MAKE IT BACK FULLY, see post-printing photo Hi everyone, I made this support for the filament sensor because I needed something that I could attach to my mount, so instead of modifying the existing designs I started from scratch and I decided to use an elastic band to tighten the two bearings. I am currently monitoring the performances and for now it has never jammed. main features: it has two side through holes that can be used to mount it on a custom support it is cool because it is spinning, swinging and can be opened :) AND NOW IT CAN BE COMBINED!!!! Inspired by brunofporto's https://www.thingiverse.com/thing:3558691
Statistics
Likes
11
Downloads
0