CR-10s Solid Bed Mount
Description
I have upgraded my CR-10s with an ABL kit from [TH3D](https://www.th3dstudio.com/product/ezabl-pro-plug-print-auto-bed-leveling-kit/) and I heard that a solid bed mount would be a good idea. I could not find one that was compatible with my drag chain, so I made my own. This is vaguely similar to the solid bed mounts that TH3D sells, but modified to fit over the arms on the lower bed mounts of the CR-10s. The way these parts fit, the drag chain end and camera mount cannot rotate after installation. If you don't have a drag chain for your heated bed, the part will probably still work fine for strain relief. If there is any interest, I could probably make a simplified version that can be used for strain relief only At a minimum, you will need three of 'Solid Bed Mount, Normal' and one of 'Solid Bed Mount, Drag Chain Bed End'. If you want to mount a webcam onto the bed mount, replace one of the 'Solid Bed Mount, Normal' parts with 'Solid Bed Mount, Camera Mount, Long Version'. You will also need a 'Webcam Rotation Adapter' and a camera adapter. I have the Logitech C270, so the only camera adapter I have is one for that camera. If there is interest, I may be able to make new versions of the camera adapter. Alternatively, I have included all of the design files in case you want to make your own adapter. Since the 3D printed parts don't touch the heated bed, the material type should not matter. The hex standoffs used are stainless steel instead of aluminum. Stainless has a lower thermal conductivity, so it will be harder for the heat from the heated bed to make it to the printed parts.
Statistics
Likes
4
Downloads
0