Bedside Lamp (Box), LED 12V 2.5W
Description
Based on "PLAzzy Lamp (Dog), LED 12V 2.5W" I designed this bedside lamp. I have tried to capture the working steps and the assembly in photosl For this project you will need: 1x … 64x64x3mm white polycarbonate glass, 70% translucency (or transparent polycarbonate glass or twin wall-sheet). I used polycarbonate glas - because of the more pleasant light. 1x … Ø 4x55mm from a threaded rod (or screw Ø m4 x 60 and saw of the screw head) 1x … Ø 4x45mm from a threaded rod (or screw Ø m4 x 50 and saw of the screw head) 2x … Ø m3x16mm + plus 2 matching washers (to connect head, neck and light base) 4x … wing nuts Ø 4 mm 10x … washers Ø 15x4,5mm 4x … self-tapping screws Ø 2,2 x 9,5mm AC/DC Socket 5,5/2,1 mm 4G bulb socket 4G bulb 2,5W/250Lm (IMPORTANT!: I do not advise the installation of a higher wattage bulb, because of too much heat development!) 2 Position Mini Toggle Switch 12 V AC/DC power adapter Soldering Iron Solder Video: https://youtu.be/mcLewjAtm3g The files must be printed in the following number of copies: 1x BSL_LED Lamp_head.stl 1x BSL_LED Lamp_back.stl 1x BSL_LED Lamp_lightsocket.stl 1x BSL_LED Lamp_neck.stl 2x BSL_LED Lamp_leg.stl 2x BSL_LED Lamp_foot.stl 1x BSL_LED Lamp_spacerwasher.stl After completion of the assembly I recommend - to improve the slip resistance - to attach small self-adhesive rubber pads to the bottom of the lamp feet (4x rubber pads Ø 8x1,6mm)
Statistics
Likes
34
Downloads
0