RC FPV Hovercraft
Description
Hovercraft size is about 320(L) x 220(W) x 190(H) mm Built using spare 5" quadcopter gear & "garbage from the top shelf" :) Print all parts with support enabled. Things I used besides filament: * 2 x 2205 brushless RaceStar motors, CW and CCW * 2 x 5042 3blade propelers (or any other 5" propellers, lower pitch for hover turbine is advised) * 2 x 20A RaceStar BlHeli_S ESC * Eachine TX02 combo (FPV cam + VTX 5.8/25mw) * 2 x 9G servos * FrSky S6R receiver (buit-in stabilization feature is a great help here) * 3S battery * Battery low-voltage buzzer * 70mm (D=5mm) rod or tube for running turbine shaft * 1100x130mm of any waterproof durable fabric * Pair of 6x4 magnets for front cover fixation * Pair of 5x10x4mm bearings (take apart 2 of your spinners ;) * M3x15 and M3x10 button-head screws, M3x10 countersunk screws and lot of M3 nuts :) Use Skirt.PDF for the skirt template. Draw it on fabric, cut with scissors & glue to plastic frame. I did it in this order: 1. SkirtButtomRear, ...RR, ...RL, ...Fwd 2. BaseFwd+BaseRear (fix with countersunk screws) 3. SkirtTopRR, ...RL, ...FR, ...FL 4. Fix base & Skirt to hovercraft body with screws. Short video: https://youtu.be/HMyHtq_jpqo Riding through the snow: https://youtu.be/of0ihJ0krkc More video will be added later A usual, see SketchUp sources attached
Statistics
Likes
119
Downloads
0