MDD with e3d v6 and EZRstruder
Description
For the modular direct drive kit from printermods.com, the suggested parts for this combination of extruder and hotend did not work. This design takes the e3d v6 adapter listed and modifies it to work with the EZR. The EZR and v6 sit very close together, there is no room for the boden tube collet, but since it is a direct path and no room for either to pop out, I don't see this as a concern. Additionally I integrated the adjustable probe mount from the herome gen3 into an alternate base. I do not have measurements for this at the moment, but it shouldn't be too different from the herome, a bit closer to the nozzle in the y direction. In the future I would like to add a fan mount to the clamp. I would also like to make clearance for the holes used to mount the MDD via linear rails. https://www.tinkercad.com/things/8TQfgf7ifIM-mdd-e3dv6-ezrstruder
Statistics
Likes
8
Downloads
0