NeoPixel LED Heart Necklace
Description
https://youtu.be/PKWkEB1s5Ik In this project we’re building an LED heart with NeoPixels. This uses Black LED acrylic to diffuse the NeoPixels inside a 3D printed case. The heart is made from pieces of strips that are daisy chained to create a custom matrix. The ItsyBitsy nRF52840 and 500mah lipo battery are housed in a separate 3D printed case. With a lipo backpack, you can recharge the battery over USB. We think this case will work nicely for your next wearable project. A button lets you trigger the reset so you can easily update the firmware. You can change the colors of the LEDs using the Adafruit BLE connect app for iOS or android. You can also trigger LED animations like the classic paint your dragon rainbow swirl. With the ItsyBitsy nRF52840 you can easily add BLE to your wearable projects. Learn Guide https://learn.adafruit.com/neopixel-led-heart-necklace/ ItsyBitsy nRF52840 https://www.adafruit.com/product/4481 Mini Skinny NeoPixel Strip https://www.adafruit.com/product/2970 Lipo Backpack https://www.adafruit.com/product/2124 500mAh Battery https://www.adafruit.com/product/1578 Slide Switch https://www.adafruit.com/product/805 10-wire ribbon cable https://www.adafruit.com/product/3890 Black LED Acrylic https://www.tapplastics.com/product/plastics/cut_to_size_plastic/black_led_sheet/668 Project inspired by Charyln https://charlyn.codes/magic-acrylic-stays-opaque-until-light-shines-through/
Statistics
Likes
41
Downloads
0