MKS GEN 1.4 Enclosure - high maintainability
Description
About *** This is a case designed for MKS Gen 1.4 Mainboard. Why a new case? *** It is not intended to be "yet another enclosure" for MKS, but rather one that gives fast access to the mainboard and built with maintainability in mind. I like to tweak my printer's accessories and I often need to connect and disconnect things from my MKS. Most of the enclosures I've seen put the mainboard at the bottom of the case, with a couple of holes to make room for cables which has the effect of locking the mainboard out after you connect everything. This enclosure fully exposes the mainboard when uncovered and can use no screws to mount the cover. Optionally, if you want to secure it, you can use longer screws on the bottom to connect the cover. Supported FAN types *** I personally used a 70mm FAN for cooling down the mainboard, but I've adapted the design to use 80mm, 70mm, 50mm and 40mm FANs. Print settings *** It's designed to be printed fast and reliable with 0.8 mm nozzle but it can also printed with 0.4 mm nozzle. PET is recommended for temperature tolerance, but PLA could work if you have a decent cooling for your stepper drivers. Enjoy
Statistics
Likes
0
Downloads
0