Simple Log Cabin (28mm scale)
Description
So, needed a log cabin, didn't need to be fancy. I wanted a 2 story split level with a ladder access to the second floor, not a staircase (since climbing a ladder with weapons ready isn't going to work out all that well, and this gives anything already on the second floor an advantage *Evil Grin*). I gave the first floor a bit of an "L" shape to it, as I like adding blind corners to things so my players can't see everything from peering through the door. Also wanted a cabin with no rear exit so that my players can later be trapped inside from outside forces easily. I slapped this together quickly and made walls thin to reduce print times. Holes are provided to add wire for hinges for the door and the shutters. I sized them to accept 16 gauge wire. Should also take some size paperclips. I added two versions of the first floor roof. One with a chimney, and one without, so make your pick. I ran out of the first brown colour I was using and had to switch to what else I had on hand, hence the colour change in the pics. Made as simple as possible as I like doing, hope this helps some of you out there, Enjoy.
Statistics
Likes
22
Downloads
0