Zoetrope
Description
I did not find a strobe light and since I am not very good at electronics, I abandoned the idea of the strobe. I put a single dimmable RGBW led strip. All zoetrops are remixes suitable for ø160mm with the support for my engine. I found a motor with variable speed here: https://fr.aliexpress.com/item/4000464216357.html?spm=a2g0o.productlist.0.0.38e93f0acdnDtM&algo_pvid=5d791648-a4fe-4fce-8d56-950603a9da8b&algo_expid=5d791648-a4fe-4fce-8d56-950603a9da8b-7&btsid=8ea5aee7-d875-4867-87ce-c4f79fa7b254&ws_ab_test=searchweb0_0,searchweb201602_3,searchweb201603_53 https://www.youtube.com/watch?v=hbVQdfynw1g&feature=youtu.be https://www.youtube.com/watch?v=7v01Rgxuyc4&t=23s The video images you see are not the ones we see with our eyes directly! The cameras obtain an image which corresponds to the strobe effect if the correct setting is found. I used a GoRo 5 and the settings are: 1080P or 2.7K resolution IPS: 24 Frames / second CDV: LINEAR BB: 6500K or Native ISO: 400 Obtur: 1/192 or more if you can (1/4000) For more technical information, you can consult these addresses: https://www.instructables.com/id/Blooming-Zoetrope-Sculptures/ http://www.johnedmark.com/#/phi/ https://www.novatropes.com Thank to : Novatropes for https://www.thingiverse.com/thing:3907796 Novatropes for : https://www.thingiverse.com/thing:3912454 hwiguna for : https://www.thingiverse.com/thing:2572626 sirofsky for : https://www.thingiverse.com/thing:3140753 About printing, I must say that the model with the cubes is very difficult to print. I have the settings: Wall 3 Top layer 4 Layer 0.2 Infill 40% Time 29H The other models did not pose any problems, it is necessary to activate the supports for the hearts.
Statistics
Likes
38
Downloads
0