Reflecta x7-Scan Diaschnellscanner
Description
This is an adaptation of my Reflecta x7-Scan Schnellscanner to quickly scan framed slides. The points i made there are mostly valid for slides as well. This is designd¹ for 50 mm slide frames. I could not find out if Americans use 50 mm slide frames, or if theirs are actually 50.8 mm wide, in the same stile that they pretend – and got the rest of the world to go along with – that 90 mm floppy disks where 88.9 mm wide. Even if the frames ar 50.8 mm, there should be enuf clearance for the wider frames. If not yu should change the sizes in the OpenSCAD file, or try yur luck with the customizer. Anyway, with this, yu can push the slides thru the scanner one by one. This is sizd so that when you put in one slide so that the right edge is flush with the edge of this thing, the next slide is position correctly for the camera. So you stick in one slide, stick in the next, take the picture, stick in the next, take a picture and so on. There are two pushers: one to position the last slide, and one to get out all the slides.
Statistics
Likes
4
Downloads
0