Dub to BB86 bottom bracket adapter
Description
Adapter to go from Dub bearings to BB86/BB92 spindle (shimano cranks) This is only a proof of concept, and created as a temporary measure until a proper BB86 bottom bracket arribes. There are 2 options, either you can use the 2 small sleeves at each end of the crank or the single piece sleeve, which allows running with a smaller Q-factor Ride at your own risk (a fusion 360 file is attached to modify the measurements to suit your particular printer) Printed at 0.2mm layer height and 0.4mm extrusion width
Statistics
Likes
2
Downloads
0