Linear Magnetic Piston Center Punch Crimping Tool for 1/2 diameter Brass Tubes
Description
These 3D parts are used to build a Crimp Tool for 1/2 diameter Brass tubes. This tool is used to crimp the spacers that slide into 1/2 inch Brass tubes in place so that they will not slide out of the tube. This Crimping Tool is used to build Linear Magnetic Pistons using 1/2 inch Brass tubes. Starter holes are drilled into the Brass Tubes where you want to place the 3D printed spacers. The Crimping Tool is used to press the Brass into the spacer holes which secures the spacer into position inside the Brass Tubes. The middle connecting piece has 1/4 inch diameter holes that can be used with 1/4 wooden dowels to hold the tool together. This Crimping Tool was designed to use the 5/32 Center Punches made by Mayhew Steel Products which can be found at the Home Depot. Zip Ties are used to fasten the Center Punches to the Crimping Tool handles. These parts were designed using the Freeware version of the EMachineShop software package.
Statistics
Likes
1
Downloads
0