Rain Pipe Mount for Netatmo Rain/Wind Gauges
Description
Made a simple Bracket to mount my Netamo Windgauge/Raingauge on a 80mm Rain Pipe. Not the Best Position - but works. Made in PETG - hopefully it would not melt in the hot Sun during the Summer. If it do - use instead ABS. You need 5 (or less) 5x370mm Cable ties, 2 M3x30 Screws with Nuts and one 1/4" Screw Don't forget to point the Wind Gauge to the South, not North if you mount it like me - Upside Down! ;-)
Statistics
Likes
2
Downloads
0