Simple Bolt Action Pen
Description
Just a really simple Bolt action pen made out of two pieces what you'll need: 1x M3 Screw 1x Pen Spring 1x pen mine the pen mine should be 88 mm (like on the picture) or it won't fit right IMPORTANT Print the "Main pen" at a maximum layer high of 0.2mm and with a higher temperature as normal (i printed it with 215c) print the "pen stop" with a resolution of 0.1mm or 0.12mm if you print it with bigger layers the two pieces rub against each other and make it hard to use the pen place the pen stop in the right orientation, you need to place the smaller end (the top part if you open the stl) on the side of the pen mine (you can try both orientations just look where the mine head comes out further) [Donate if you want, need more Filament for other Projects/Prototypes ;)](https://www.paypal.me/StriK3FoRC3Creator)
Statistics
Likes
70
Downloads
0