Tofu Numberpad case for Cospad
Description
This is a simple angled case for the Cospad numberpad PCB, designed to match the "Tofu" 60% and 65% cases from KBDfans. The bottom row of the cospad will need to be removed for this case. locate the row of perforations, and use a knife to score along the holes, then the bottom row can be snapped off. use 3mm M2 brass inserts in the standoffs (just press them in with a hot soldering iron). Use 4mm M2 screws to hold down the PCB. The plate is the same one I used in my "Super60" project. because of the angled top, I recommend printing this at .1mm layer height to minimize the stair stepping.
Statistics
Likes
16
Downloads
0