Yet Bondtech Bowden Extruder - Geared with Belt
Description
<strong>Yet a Bondtech Bowden Extruder - Geared with Belt!</strong> I have made a non-geared version over here <a href="https://www.thingiverse.com/thing:4140573" target="_blank">Yet a Bondtech Bowden Extruder</a> <strong>Usage</strong> If you can't get it to grab filament when idler is closed and tightened, you need to loosen the idler screw. Using a 0.9degree motor with 1/16 multistepping, I have 1058 steps/mm Gearing is 3.75:1 <strong>BOM</strong> 1x m3 25mm screw 7x m3 10mm screws 2x m3 nuts 6x m3 spacers 1x spring for idler tensioner - I found an 8mm long one I'm using. 1x m3 35mm screw for idler tensioner. (30mm or much longer can work). 1-2x Bowden couplers 1-2x Collect clips 2x MF105ZZ bearings 1x GT2-60 1x GT2-16 1x M5 50mm fully or partly threaded screw. (can use idler post) 1x M5 Lock nut 1x GT2-172 closed belt. <strong>Supports and orientation</strong> Supports are build into the files for Body and Idler and all parts should be printed in the orientation they are in when loading the files. Designed to be printed with 0.2mm layer or a division here of.
Statistics
Likes
19
Downloads
0