20mm frame legs (3" lift)
Description
This is a 3" lift for your 20mm framed printer (Tronxy in my case). It utilizes your stock 4mm x 8mm screws and cam lock nuts. Also, it should reinforce the frame better than the stock corner plates that are included with most printer kits. I made these so you can place the control box under the printer. Please comment with your printer name that this works for and I'll add it to the 'Tags' list for other to find easier. *******Latest update: I've uploaded additional files for larger screw heads labeled xxx300.stl for .300"(7.62mm) screws. The other files are for .270"(6.858) smaller head screws. The files are fixed and uploaded. One style is for beveled extrusions(like the one a wheel rolls down) and one style is a square profile which will need supports(probably) to print. *******The registration tabs that sit in the extrusion are a little off, so you may have to creatively trim them to fit. I am fixing the drawing now. *******The original drawing was based on extrusions that have a beveled profile. I will upload ones for square profiles also.
Statistics
Likes
9
Downloads
0