Not fancy - Cool spool hanger
Description
Spool storage made simple. Only uses about 8.5m of filament and needs just 1 screw into your wall. The design has one 4.5mm hole in the base for the mounting screw and room for a maximum 15mm diameter washer to spread the screw load. Has a tiny bump at the front to avoid the spool coming off too easily. It is so robust in ABS I reckon it would be plenty strong enough in PLA as well (even at 10% infill.) Accepts spools up to 80mm wide with a 55mm hole or greater. Let me know what you think!
Statistics
Likes
4
Downloads
0