VESA mount holder
Description
Mounting solution (holder) for Mini PC like "HP 260 G2", "HP 260 G3" and all other VESA-compatible devices I needed a simple and inexpensive solution for attaching a mini PC to a display. But branded mounts from HP are expensive, so this solution was invented. This mount is great for devices and monitors with a VESA 100*100mm mount. The use of this mount is not limited to the display only. You can use it on other surfaces: wall, table, under the table(!). When attaching to wooden surfaces, the screw must be replaced with a wood screw for of suitable length (for holder-final-part3.stl) Additionally, 4pcs M4*12mm and 4pcs M4*15mm flat head screws are required (In my case). The length of the screws may vary in your case (depending on the monitor and device) The part holder-final-part1.stl must be screwed on without special effort, so that the part after installation can be turned 90 degrees down. See photos. One mounting kit required: holder_final_part1.stl - 1pcs holder_final_part2.stl - 3pcs holder_final_part3.stl - 4pcs The model is absolutely free, but I will be glad to reward :)
Statistics
Likes
15
Downloads
0