AC PrintrBot LC v2 X Rod Support Stabilizer
Description
I Really Do Not Like The Plates That Hold The X Rods In Place On The Lc V2. 1) They Are Wood, Wood Warps. 2) There Capture Area Is Tiny Narrow And Not At All Rigid. So I Decided To Design My Own X Rod Blocks, They Grab On To Twice As Much Rod And They Hold The Rods Even, Level, And Ridged. The Little Clear Pla Face Plate Is A Diffuser For A Blue Power On Led I Am Going To Place In Each One. If You Do Not Want An Led, You Can Add Color To The Design By Printing The Plate A Different Non Transparent Color, Or If You'Re A Monochrome Person,. Print Both Parts The Same Color. They Press Fit Into The Fixture. If You Do Go With The Led Idea, Print The Diffuser 1 Wall In All Directions With Honeycomb And The Honey Comb Will Show Through With The Light. The Actual X Rod Blocks Should Be 2 Walls In All Directions ~30% Infill.
Statistics
Likes
4
Downloads
0