Tronxy cooling (and any other printer with the same setup)
Description
This duct works pretty well and is way more compact than the ones I have seen out there. As long as you have this style of heatsink, it should work. The mounting holes for the backplate are spaced apart by about 2.28" (57.66mm) so as long as you have that much room, you should be able to use it for your printer. The squirrel fans are evercool ec4014h12e-b which is a 50mm x 15mm class. You may have to carve a little if your fan is too tight. The bolts are 4mm x 20mm that hold the fans in place. The bottom screws are 3mm x ? and I drilled the holes out a little bit smaller than the screw for a friction fit which holds a 40mm x 40mm x whatever size fan (10mm in my case).
Statistics
Likes
2
Downloads
0