[Ender 3] Safe and Cheap Auto Power Off for V-156-1C25 SPDT Roller Lever Micro Switch

Description

"You want to find a safe and cheap way to turn off your printer once the print is successfully finished? Here is a solution for you. It is designed to fit on an Ender 3, but other printers with a similar design should work as well." That's what Wwwill said on it's page: https://www.thingiverse.com/thing:3744808. I wanted this also but I had a different switch laying around. I've used the V-156-1C25 SPDT Roller Lever Micro Switch. That's the reason I've made a different standoff for the switch in comparison to Wwwill's version. For all the other details (schematics) I would like you to direct to the original page. Credit is given where credit is due. So this stand is only useable when you have the V-156-1C25 SPDT Roller Lever Micro Switch laying around. Quick note: I've used M5 bolts because I've used al the other bolts supplied with the printer for other modifications. These bolts are quite high (16 mm) and that's why the floor is 9.7 mm high to cover up the extra length of the bolts.

Statistics

Category

Tags