Dooria Sliding Door Guide Extender
Description
This is an extender for the Dooria sliding door guide. One of my sliding doors had too much clearance to the floor so the guide was hardly high enough to reach the groove in the door. The guide was also too far in the wall so the door would fall out of the guide some times when the door was closed. I used two part epoxy adhesive to attach this extender to the original guide and it is very solid. See before and after pictures. The one that I printed was the "Skyvedørguide_1.stl" as you can see in the pictures. I also made some other different versions: Skyvedørguide_1.stl: Extra hight: 5 mm, Extra length: 14 mm (about 11 mm clearance to the floor for floor molding trim. See picture) Skyvedørguide_2.stl: Extra hight: 5 mm, Extra length: 14 mm Skyvedørguide_3.stl: Extra hight: 2 mm, Extra length: 14 mm Skyvedørguide_4.stl: Extra hight: 5 mm, Extra length: 7 mm Skyvedørguide_5.stl: Extra hight: 2 mm, Extra length: 7 mm
Statistics
Likes
4
Downloads
0