Maple Syrup Tap
Description
Here's my tap for making maple syrup. These suckers get expensive to buy a few bucks at a box store, now we can print them for pennies per piece. If you have any questions or feedback leave me comment. *If you like my design please tip me a few meters of filament, so I can keep on printing. Thanks you.* **Twist Drill Size:** 7/16 in or 11 mm **Drill Depth:** 1 1/2 in or 40 mm **When to Tap:** February to mid March **Min Tree Diameter:** Around 18 in or 45 cm I used 2mm spring steel wire to hole the jug, but any wire will do. Like a coat hanger, e.g. Mine held 18 LBS or 8 KG with no problems. *Remember to fill holes with tar when done, to keep bugs out e.g.* > **Updates** >>**Version 1.2** >>The STL mesh is higher quality. > >>**Version 1.1** >>Added more taper to the tap. > >>**Version 1.0** >>Initial release
Statistics
Likes
9
Downloads
0