Motorcycle throttle lock (for heated grips 33,5 mm)
Description
I designed this for my bike which has heated grips. These are thicker than the standard grips and have a diameter of ~34.5 mm. Additional Parts needed: - M5 thumbwheel (goes on top) - M5 bolt with a hex head (threaded length 25 mm) (I had a bolt with a bigger plastic head available so used it and a M5 nut instead; see picture). If you use the bolt and thumbwheel, the bolt inserts from the bottom. The two parts are printed simultanious. No support is needed. If your printer is calibrated properly, loosning the parts should be easy (only two fingers needed).
Statistics
Likes
47
Downloads
0